|
|
Notes to
help you fill in the form
|
|
1.
Diagram viewed from above
|
|
2. All
measurements in millimetres accurate to 10mm. eg 3meters = 3000mm
|
|
3. Note
edges of sails are not straight, they have approximately 7% hollow.
|
|
4.
Measure edges of the sail in a straight line from fixing point to fixing
point. Do not make any allowances for turnbuckles or
stretch.
|
|
5.
Measure the diagonals from fixing point to fixing point A-C,
B-D, etc
|
|
6.
Measure heights of all fixing points above a common ground level, not the pole height
|
|
7.
Turnbuckles fit between sail and pole for tensioning, choose 3 corners only.
|